Shop

6.6kW Vehicle Charging Kit 312Volt

£1,829.72 Excl. Tax

Availability: Out of stock

6.6kW Vehicle Charging Kit 312Volt

6.6kW Vehicle Charging Kit 312Volt


6.6kW Charger 108V;
           Voltage range: 110V~440V : 312V nominal
           Max output: 20Amp
           Plugs & pins


EVCC (Charge Controller);
           Serial cable
          Cable, plugs & pins


62196-2 32A Vehicle Male Inlet;
           4 Point Fixing
           Water Drain
           Dust Cap with Lanyard
           Gaiter Protection

Description

Details

Includes;

6.6kW Charger 312V;

           Voltage range: 110V~440V : 312V nominal
           Max output: 20Amp
           Plugs & pins

EVCC (Charge Controller) with serial cable;
Thunderstruck CAN controlled Charger Controller that has user adjustable settings. This way if you change your battery pack configuration you don't need to buy a new charger or pay someone to reprogram it for you.

The EVCC integrates charger CANBUS control and Type 2 & J1772 functionality in a simple to use, cost effective, and environmentally robust enclosure. Charge parameters such as maximum voltage, maximum current, and total charge time are configured, saved in nonvolatile memory, and used when charging to control a CAN enabled charger. Uses approximately 45 mA from a 12VDC source while in charge mode. 
 
 -CAN controlled is the new standard for component to component communication. Configuration is performed by a PC running a terminal emulation program over a USB port. These settings are stored in EVCC eeprom. Compatible with Windows 10, XP, 7, Vista, Mac OS 10.7 or newer, and Android tablets version 3.2 or newer. EVCC comes with 4' cable legths. 
  -Charger output for lithium is adjustable for Current, Max Voltage, max charging time, and termination current.  Additionally a profile for lead-acid can be enabled which adds a 3-stage charge curve specific for that chemistry.

 -Low Current feature (user adjustable) for lower power outlets while charging on the road.

62196-2 32A Vehicle Male Inlet;
            4 Point Fixing
             Water Drain
             Dust Cap with Lanyard
             Gaiter Protection

Specifications

6.6kW Charger 312V;

Basic Specification:
Input voltage range：AC90V~264V
Output Voltage range : 110V~440V : 312V nominal
Max Output : 20Amp
Frequency：45Hz~65Hz
Power factor：≥0.99
Efficiency at full-loading ：≥93%
Mechanical impact and vibration grade：QC/T 895－2011
Protection grade：IP67
Operation temperature：- 40℃～85℃
Storage temperature：- 40℃～105℃
Charging control: Elcon CAN (500kbps)
Size：270(length) x 230(width) x 110(height) (fan-cooled)
Cooling method：Enforce Air Cooling
Weight : 7.5kg

AC in:

Pin 1: LINE or LINE1

Pin 2: EARTH GROUND

Pin 3: NEUTRAL or LINE2 

DC out:

Pin 1: POSITIVE

Pin2: NEGATIVE

Communications:

Pin 10: 12V 5A OUT

Pin 11: CAN H

Pin 12: CAN L

Pin 17: GND

Be careful reading pin numbers looking at the back of the connector with red tab coming up in the middle on top.

Reviews